Hyperflux 6S1P Black Series 5000mAh Li-Ion FPV pack, made in NZ

5000mAh Li-Ion Pack

6S 5000mAh Li-Ion FPV Pack

$149.99

The high-voltage pack for long-range and cinematic 6S builds. 108Wh at ~445g, about 40% lighter than a typical 6S 5000mAh LiPo, so more energy lands on the airframe, not the scale. Genuine Reliance RS50 cells deliver 70A continuous and 140A burst (5s) for mountain runs, tracking shots, and flights that stretch well past the ten-minute mark. Need harder current? Move up to the 6S2P.

70A Continuous140A Burst (5s)21.6V Nominal108Wh
Capacity
5000mAh
Nominal
21.6V
Weight
~445g
Energy
108Wh
Dimensions
~46 × 68 × 76 mm
Connector
XT60
Balance tap
JST-XH 7-pin (6S)
Charge rate
1C (5A) recommended
Cutoff voltage
15.0 V (2.5 V/cell)
70A continuous140A burst (5s)
Official Reliance RS50 cell datasheet (PDF) ↓

No BMS on this pack, and no low-voltage or over-current cutoff. Balance-charge in Li-Ion mode with the balance lead connected, and set your own flight cutoff. Safety guide.